Do washers need to be lubricated?

Nov 16, 2026

Leave a message

Ryan Chen
Ryan Chen
Ryan is a mechanical engineer working on product development at XiangGu Hardware. He focuses on designing durable and cost-effective fasteners for various industrial applications.

As a washer supplier who's been working with fasteners and industrial components for over a decade, I've heard all kinds of questions from mechanics, construction crews, and DIY enthusiasts: "Can I just grease that washer before I tighten the bolt?" or "Why does my old spring washer keep squeaking when I torque it down?" These questions make sense-lubrication is such a common part of maintaining machinery, from oiling a lawnmower engine to greasing a car's wheel bearings. But when it comes to washers, there's a lot of misinformation floating around. Some people swear by lubricating every washer they install, while others say it's a total waste (or even harmful). Let's break this down with real-world science, examples from our work, and practical advice that actually works for your projects.

First, let's get clear on what washers do. Most people think washers just spread the load of a bolt or nut, and that's part of it-but different types of washers have specific jobs. Plain flat washers, for example, prevent the bolt head or nut from digging into soft materials like wood or plastic, and they also create a smooth surface to distribute pressure evenly. Then there are lock washers, which are designed to stop nuts from loosening due to vibration. Our range of products includes everything from standard spring washers (/spring-washers/standard-spring-washer.html) to specialized ones like spring lock washers (/washers/spring-lock-washers.html), wave spring washers (/spring-washers/wave-spring-washer.html), and bolt spring washers (/spring-washers/bolt-spring-washer.html), plus hardened steel washers (/washers/hardened-steel-washers.html) for high-stakes jobs. Each of these has unique properties, so whether you should lubricate them depends entirely on what type they are and what you're using them for.

Let's start with the basics: how lubrication works in fastener assemblies. When you tighten a bolt, three things happen: the threads create friction, the underside of the nut or bolt head creates friction against the washer, and the washer itself is compressed (for spring or lock types) as torque is applied. Lubrication reduces friction, which means less torque is needed to achieve the desired clamp load-the force that holds the assembly together. That sounds like a good thing, right? Well, it depends. If you over-lubricate, you can actually reduce the clamp load too much, because the friction that holds the bolt in place is diminished. For lock washers, that's a big problem because their entire purpose is to create tension and friction to prevent loosening.

Take hardened steel washers, for example. These are the workhorses of industrial applications-they're tough, durable, and designed to handle high loads. Do they need lubrication? It depends. If you're using them on a bolt that will be repeatedly removed and reinstalled (like on a machine panel you access monthly), a light lubricant can prevent corrosion between the washer and the metal, and make future disassembly easier. But if you're using them in a permanent installation-like securing a steel beam to a bridge-over-lubricating can lead to the washer slipping, reducing the clamp load and risking structural failure. I've seen this firsthand: a construction crew once used too much grease on hardened steel washers for a bridge truss, and after a few months of vibration, some bolts started to loosen because the lubricant had eliminated the friction between the washer and the beam surface. That's why we always advise customers to follow torque specifications from the manufacturer, not just guess based on lubrication.

Now, lock washers-this is where people get confused. Spring lock washers, like the ones in our catalog, have split ends that dig into the nut and the surface below when tightened, creating tension that resists loosening. If you lubricate a spring lock washer, the lubricant coats those sharp ends, making them slippery. They can't bite into the metal, so they lose their ability to lock. I had a customer last year who was assembling agricultural machinery and was convinced lubricating his spring lock washers would prevent rust. Instead, after a week of running the machine, several nuts came loose, and a part broke off because the lock washers couldn't grip. He reached out to us frustrated, and after explaining that lubrication was the issue, he switched back to un-lubricated washers and hasn't had a problem since. The key here is that lock washers rely on friction and tension, not smoothness, to do their job. So for standard spring washers, spring lock washers, and bolt spring washers-all designed for locking action-lubrication is almost never necessary, and often counterproductive.

What about wave spring washers (/spring-washers/wave-spring-washer.html)? These are different from traditional lock washers: they have a wave-like shape that creates consistent axial tension when compressed, instead of the split ends of a spring lock washer. They're often used in tight spaces where a regular spring washer won't fit, and in applications where you need even tension across multiple components. Do these need lubrication? Because their design is more about tension than biting into surfaces, a light lubricant can actually help them compress smoothly and maintain consistent tension over time. But you still have to be careful-too much lubricant can cause the wave peaks to slide, reducing the tension. For example, in a precision automotive application where wave spring washers are used to seal a hydraulic system, a tiny amount of food-grade lubricant (if it's in a food processing machine) is fine, but a thick grease would be too much. We recommend customers test a small batch first to make sure the lubrication doesn't affect the tension readings.

Plain flat washers, on the other hand, are often misunderstood. A lot of people think plain washers are just spacers, but they're critical for creating a stable surface. If you're using a plain washer on soft material like wood, lubrication can help the washer sit flat without digging in, which actually improves the load distribution. But if you're using a plain washer on two hard metal surfaces, lubrication might not do anything except add unnecessary grease that can attract dust and debris. In that case, a dry film lubricant (like a Teflon coating) is sometimes better than oil or grease, because it reduces friction without leaving a sticky residue that can cause buildup. I've had a customer who installs solar panels on roofs-they use plain flat washers to protect the roof's membrane. They started using a light silicone lubricant on the washers, which made it easier to tighten the bolts without damaging the membrane, and reduced the chance of the washer sticking to the membrane over time. That's a case where lubrication was the right call, because it was protecting a delicate surface, not interfering with a locking mechanism.

Another factor to consider is corrosion. Washers made of carbon steel will rust if they're exposed to moisture, especially in outdoor or marine environments. Should you lubricate them to prevent corrosion? Again, it's a balance. A thin coat of anti-corrosion lubricant can work, but if the washer is going to be tightened against another metal, the lubricant can create a barrier that prevents galvanic corrosion (the chemical reaction between two different metals). But for lock washers, the corrosion protection is secondary to their locking function. If a lock washer is coated with lubricant, it might not rust, but it also won't lock. So for outdoor applications, if you're using lock washers, we suggest using a zinc-plated washer (instead of lubricating it) to prevent corrosion-zinc plating is a sacrificial layer that protects the steel, and it doesn't affect the locking action. For hardened steel washers that aren't lock washers, a light coat of lubricant after installation can help prevent rust, just make sure you don't apply too much that it affects the clamp load.

Spring lock washers (4)Bolt Spring Washer

Let's talk about common mistakes people make with lubricating washers. The first is assuming all washers need the same treatment. I've seen people lubricate every washer in an assembly, regardless of type, and that's a quick way to run into issues. The second is using the wrong lubricant. Oil or grease is too thick for most applications-dry lubricants are better because they reduce friction without leaving a sticky residue. The third is forgetting that lubrication changes torque values. If you're working on a critical assembly, always check the torque spec for lubricated vs. un-lubricated fasteners. For example, a bolt tightened with an un-lubricated washer will need more torque to get the same clamp load as a bolt with a lubricated washer. If you use the same torque for both, the lubricated one will be too loose, and the un-lubricated one might be over-tightened and break.

Now, let's get practical: what should you do when you're working on your next project? First, identify the type of washer you're using. Is it a lock washer (spring lock, bolt spring) or a plain flat/ wave spring washer? For lock washers: skip the lubrication. Their design relies on friction, and lubrication will make them ineffective. For plain flat washers on soft materials (wood, plastic, membranes): a light dry lubricant is okay, just don't overdo it. For wave spring washers in precision applications: test a small amount of lubricant first to make sure tension stays consistent. For hardened steel washers in high-load permanent installations: avoid lubrication unless the manufacturer recommends it, to prevent slippage. For hardened steel washers that will be disassembled often: a thin coat of anti-corrosion lubricant makes future work easier.

As a washer supplier, I've worked with thousands of customers on all kinds of projects, from backyard decks to industrial factories. The biggest mistake I see is people overcomplicating lubrication. Washers are simple components, and their job is often best done without extra lubrication. But that doesn't mean you should never lubricate-you just have to match the lubrication to the washer type and application. If you're unsure about a specific project, don't guess. Reach out to your supplier (like us!) and ask for advice. We can help you pick the right washer for the job and tell you if lubrication is necessary.

At the end of the day, the goal with any fastener assembly is a secure, long-lasting connection. Lubrication can help with that, but only when used correctly. For lock washers, it's a enemy. For some plain and wave spring washers, it can be a helpful tool. The key is to understand what your washer is designed to do, and adjust your approach accordingly.

If you're looking for washers for your next project-whether it's standard spring washers, spring lock washers, wave spring washers, bolt spring washers, or hardened steel washers-and you need help figuring out if lubrication is right for your application, we're here to help. Contact our team to discuss your specific needs, get product recommendations, and find the right components for a reliable, long-lasting connection.

 

 

  1.  
Send Inquiry