Causes of damage to threaded fasteners

Mar 04, 2024

Leave a message

After the threaded fasteners are loosened, a huge kinetic energy mv2 is generated. This huge kinetic energy directly acts on the fasteners and equipment, causing damage to the fasteners. After the fasteners are damaged, the equipment cannot work under normal conditions, further causing Equipment damage. When fasteners are subjected to axial force, the threads are damaged and the bolts are pulled apart. When fasteners are subjected to radial force, the bolts are sheared and the bolt holes are made into ovals. Two nuts with different rotation directions are used when connecting. The nuts on the working supporting surface are called fastening nuts, and the nuts on the non-supporting surface are called locking nuts. When using, pretighten the fastening nut first, and then pretighten the locking nut. In the case of vibration and impact, the fastening nut will tend to loosen. However, since the loosening direction of the fastening nut is the tightening direction of the lock nut, the tightening of the lock nut just prevents the fastening nut from loosening. As a result, the tightening nut cannot be loosened.

Send Inquiry