-
Domed Head Blind RivetThe zinc-plated finish provides mild corrosion resistance. These rivets join material when you only have access to one side. The low-profile domed head creates a finished appearance.
-
Open End Blind RivetsMade from 304 stainless steel, these blind rivets create a strong hold even in wet and damp areas. The domed head gives your project a finished appearance.
-
Rivet NutsAbout twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc yellow-chromate plated for corrosion resistance.
-
Self-Clinching StudsStainless steel studs have good chemical resistance and may be mildly magnetic.. Press them into a drilled or punched hole with an arbor press or similar pressure tool.. Also known as self-clinching
-
Flat Head Solid RivetsInstallation of solid rivets requires access to both sides of the material as well as a hammer or a solid rivet tool.
Boulderfly Flush Head Rivet Set - 1/8" Body Length for Squeezer $4.95 3X AIR Hammer KIT for Solid Rivets. Comes with 2 Bucking Bars, 4 Cupped Universal...
Definition of flush-head rivet. : a rivet with a countersunk head....
Flush rivets, also countersunk rivets are used on external surfaces to ensure a good appearance and eliminate aerodynamic drag. This is due to its use of both countersunk holes and heads....
Feb 01, 1993 · As in the installation of conventional protruding head rivets, flush riveting starts with the drilling of the correct size hole for the rivet selected. The additional work generated by...
The low-profile head provides near-flush seating without special hole preparation. ... ***Learn More About Flat Head Rivet Nuts. Rivet Nut (Flat Head) Specification. PART NUMBERING SAMPLE Example:...
Install them in countersunk holes, and their angled head sits flush with the material’s surface. 18-8 Stainless Steel Flush-Mount Blind Rivets With good strength and corrosion resistance, these...
