Screws are removable devices, so screws will start to loosen over time (especially stainless steel screws and non-standard screws). Therefore, some companies need to prevent the screws from loosening. Simply speaking, it is necessary to make the screw used on the product material, so that the screw will not fall off lightly. Screw and product materials need to be more tightly connected together. For screw locking solutions, there are two solutions. Next, the following two solutions to screw locking are stated.
The first is the use of special materials rebound, such as engineering resin materials, it has a good rebound. Attach it to the stainless steel screw thread. Make it and nut, or material products for mechanical friction. Produce vibration and absolute resistance. Completely solve the screw loose problem.
The second, simply speaking, is to apply a layer of glue on the screw thread, the so-called dispensing. This kind of glue is called drop resistant. This adhesive has good properties such as high adhesion, non-toxic and so on. This kind of glue is applied to the screw, and after drying, it has strong adhesion. The screw thread can be combined in the nut thread or in the thread hole of the product to produce super factor tightening effect. Play a super good anti loose effect.
