Stainless steel screws are classified into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel and precipitation hardening stainless steel. Stainless steel screw selection is also a principle, from what aspects, let you choose the stainless steel screw you need. After comprehensive and comprehensive consideration of these five aspects, the brand, variety, specification and material standard of stainless steel screw are finally determined
Austenitic stainless steel: the most basic alloy elements of austenitic stainless steel are chromium and nickel, and the representative brand is chromium nickel austenitic stainless steel with about 18% chromium and 8% nickel, which is often called 18-8 stainless steel. The element ratio of Cr and Ni basically ensures that the structure of steel is stable austenite
Ferritic stainless steel: 430 type ordinary chromium steel, its corrosion resistance and heat resistance are better than 410 type, magnetic, but it can not be heat treated to strengthen, suitable for stainless steel screws with slightly higher corrosion resistance and heat resistance and general strength requirements.
Martensitic stainless steel: type 410 and type 416 can be strengthened by heat treatment with hardness of 35-45hrc and good machinability. They are used as heat-resistant and corrosion-resistant stainless steel screws for general purposes.
416 is a free cutting stainless steel with high sulfur content. Type 420, with sulfur content of? R0.15%, improved mechanical properties, can be strengthened by heat treatment, with maximum hardness of 53-58 HRC. It is used for stainless steel screws requiring higher strength.
Precipitation hardening stainless steel: 17-4PH, ph15-7mo, they can obtain higher strength than the normal 18-8 type stainless steel, so they are used for high strength, corrosion-resistant stainless steel screws.
A-286, a non-standard stainless steel, has higher corrosion resistance than the commonly used 18-8 type stainless steel, and still has good mechanical properties at elevated temperatures. It can be used as high-strength, heat-resistant and corrosion-resistant stainless steel screws up to 650-700 ℃.
