Where to use Tapping screws

Feb 26, 2022

Leave a message

Tapping screws are mostly used for the connection between thin metal plates (steel plates, saw plates, etc.). When connecting, first make a threaded bottom hole for the connected piece, and then screw the Tapping screws into the threaded bottom hole of the connected piece.

Since the threaded surface of Tapping screws has a high hardness (≥HRC45), the internal thread can be tapped in the threaded bottom hole of the connected piece to form a connection.

Self-tapping pin screws are also mostly used for the connection between thin metal plates.

The thread is an ordinary thread with an arc-shaped triangular section, and the thread surface also has high hardness, so when connecting, the screw can also tap the inner thread in the threaded bottom hole of the connected piece to form a connection.

This kind of screw is characterized by low screw-in torque and high locking performance, which has better working performance than ordinary Tapping screws and can be used in place of machine screws.


Send Inquiry