The welding nut is equivalent to combining two separate parts into a whole. The metal is first melted at high temperature and then mixed together and then cooled. An alloy is added in the middle. Due to the effect of molecular forces inside, the strength is generally greater than the strength of the parent body. General nuts are usually used in thin-walled plates and are embedded through pressure, so the contact surface is the contact stress. In fact, the strength depends on the connector and the mother body. The nut is subject to shear stress, so if the strength of the nut is not enough It will be damaged by shear, and if the strength of the matrix is not enough, it will be plastically crushed and deformed to failure.
Each of these two types of nuts has its own advantages and disadvantages. For example, the welding nut is relatively strong and has a wide range of uses. The thickness can be controlled freely. However, due to high temperature, the connected parts will be deformed and cannot be disassembled, and some are active. Metals cannot be welded by conventional methods, such as aluminum, magnesium, etc., and require shielding gas or argon arc welding, which requires clear processing technology and precision. Generally, nuts are easy to install and disassemble, and are easy to install and transport, so they are suitable for almost any Metal that can be punched, but its range of use is relatively narrow, so it can only be used for thin-walled panels or sheet metal connections.
Welding is a process in which the materials of the workpieces to be welded (same or different types) are heated or pressurized or both are used together, with or without filling materials, so that the materials of the workpieces can achieve interatomic construction and form a permanent connection. Welding Nuts are fasteners that have internal threads and are used with bolts. A mechanical part that has internal threads and is used in conjunction with a screw to transmit motion or power.
