What is the cause of slippage of Socket head screws

Nov 26, 2021

Leave a message

First, there may be some minor problems in the production of Socket head screws, which will cause the hexagonal groove to be slightly too large. After being used for a period of time, friction will cause slipping.


Second, the punch of Socket head screws is not very good. Another reason is that the three opposite sides of the hexagon of the bolt are not very symmetrical, or the angle of the cone angle does not meet the requirements during the production process, and is generally too large. Or the edges and corners of Socket head screws are not standard due to various reasons such as non-standard production. If the depth of the thimble is not enough, the phenomenon of slipping will occur.


Third, the wire material of Socket head screws is not good, which will cause the bolts to be soft in hardness and the wire purity is not enough. If this is the problem, the manufacturer can increase the hardness of the hardware screws by replacing the wire of the socket head screws. If you want to further prevent slippage, you can choose electroplating after the inner hexagonal groove is produced to prevent the slippage of the hexagon socket bolts after a long time.


Fourth, too much lubricating oil is used during use, which will also cause slipping of socket head screws.


Send Inquiry