1. Choose the right screws
Choose tapping screws with the right length, diameter and thread size according to the thickness and hardness of the installation material.
Consider the material of the screw to adapt to different usage environments.
2. Pre-drilling
For harder materials or situations that require more precise installation, you can pre-drill first, but the drilling diameter should be slightly smaller than the screw diameter.
3. Keep it vertical
During installation, make sure the tapping screws are perpendicular to the installation surface to avoid tilting that may cause the screws to bend or the installation to be loose.
4. Appropriate torque
When using a screwdriver or power tool, apply appropriate torque and do not over-tighten to avoid damaging the screws or materials.
5. Control the speed (power tool)
If you use a power tool for installation, control the speed to avoid overheating or damage to the screws due to high speed.
6. Tighten in batches
For the installation of multiple tapping screws, do not tighten them all at once, but tighten them in batches to ensure uniform force and flatness of the installation.
7. Check the installation effect
After the installation is completed, check whether the screws are tightened firmly and whether there is any looseness or protrusion.
8. Pay attention to safety
Wear appropriate protective equipment during operation, such as goggles, to prevent debris from flying and injuring people.
