1. Frictional anti-loosening (relies on friction)
Spring washers: Maintain pressure between threads through the spring force of flattening. Low cost but moderate anti-loosening effectiveness, suitable for non-critical locations.
Self-locking nuts:
Nylon inserts: Threads are embedded in a nylon ring, preventing loosening through friction. Poor temperature resistance (≤120°C).
Metal collars: Nut collars are designed to lock radially after tightening, allowing for reusability.
Double nut counter-tightening: The main nut and auxiliary nut are tightened in opposite directions. Low cost but may fail due to long-term vibration.
2. Mechanical anti-loosening (physical locking)
Cotter pin + slot nut: After tightening the nut, a hole is drilled to insert the cotter pin. High reliability, but requires drilling.
Stop washers: The inner tongue of the washer fits into the bolt groove, while the outer tongue is bent to lock the nut. Suitable for small batches requiring high anti-loosening. Series Wires: Steel wires are inserted into the bolt holes to create a mutual brake, suitable for preventing multiple bolts from loosening.
3. Permanent Locking (Irreversible)
Thread Adhesive (Anaerobic): Thread Adhesive cures and bonds the threads after application. Heat is required for removal, making it suitable for maintenance-free applications.
Punching/Riveting: Destroys the threads at the end of the bolt or rivets the nut tightly. This provides reliable locking, but is non-removable.
