Quality inspection of high strength bolts

Feb 16, 2024

Leave a message

The quality inspection of high-strength bolts can generally be divided into two stages. The first stage is the process inspection based on the process flow, and the second stage is the quality inspection after the high-strength bolts are tightened. Both inspections are very important, but the inspection at this stage directly determines the connection quality of high-strength bolts.

The inspection content of each stage

The installation method and installation process of high-strength bolts; the treatment and arrangement of joint surfaces; the tightening sequence and tightening methods of high-strength bolts, etc. Inspection of equipment technology is the key point and key to quality inspection of high-strength bolt construction.
Inspection content of the second stage

1. It is necessary to inspect large-angle high-strength bolts. It is necessary to use the small hammer tapping method to inspect high-strength bolts to prevent leakage. This method is mainly to use your fingers to hold one side of the nut. If the finger feels a slight tremor when pressing, it should be as close as possible to the nut near the washer, and then use a small hammer weighing 0.3~0.5 kg to tap the other side of the nut. , if the finger feels a slight tremor, it is considered qualified. If the tremble is relatively large, it may be missing or under-tightened. If there is no tremor at all, it is over-tightening.

2. Quality control and inspection of torsion-shear type high-strength bolt connection pairs. Because of its structural characteristics, the plum blossom stem part bears the reaction torque during construction, so the plum blossom head part is twisted off. This means that the same torque is now exerted on the bolted coupling pairs. Therefore, during inspection, you only need to visually check that the torx head is twisted off to be considered qualified. However, if you cannot use a special wrench for a single bolt, you need to follow the inspection method for high-strength large hexagonal bolts of the same diameter.

Send Inquiry