1. Installation process principle
Insert and deformation
First, place the Rivet Nuts in the pre-drilled sheet hole. The installation tool (such as a pneumatic or hydraulic rivet gun) pulls the mandrel in the center of the rivet nut. During the pulling process, the main part of the rivet nut will deform radially under the restriction of the hole wall. For example, for an ordinary round rivet nut, its outer diameter will gradually increase, so that it fits tightly with the wall of the sheet hole.
This deformation is achieved through the plasticity of the material of the rivet nut itself. Its material usually has good ductility, such as carbon steel, stainless steel or aluminum alloy, which can smoothly change shape under the action of the installation tool and firmly embed into the sheet material.
Forming a firm connection
When the mandrel continues to be pulled, the flange part at the bottom of the rivet nut will also be deformed by pressure and pressed tightly against the surface of the sheet. In this way, the rivet nut forms a reliable internal thread connection point on the sheet by closely fitting with the wall of the sheet hole and pressing the bottom flange against the sheet surface. It is like a nut "growing" on the thin plate, which can be easily matched with the bolt for subsequent tightening operations.
2. Principle of tightening stage
Thread matching principle
When using bolts and Rivet Nuts for tightening, the threads between them bite each other. Like ordinary nuts, when the bolt rotates into the threaded hole of the rivet nut, the inclined structure of the thread converts the rotational motion into axial tension or pressure, thereby tightly connecting two or more parts together.
Since the rivet nut is firmly fixed on the thin plate during installation, it can withstand the axial force generated when the bolt is tightened, and evenly distribute this force to the surrounding area of the thin plate, avoiding excessive local stress and causing damage to the thin plate.
3. Anti-loosening principle (some rivet nuts have)
Special structure anti-loosening
Some Rivet Nuts have special anti-loosening structures. For example, rivet nuts with nylon inserts, the nylon material will produce elastic deformation after the bolt is tightened, thereby exerting a continuous friction force on the bolt to prevent the bolt from loosening due to vibration and other reasons. Some rivet nuts use deformed threads or other mechanical locking methods. After the bolt is installed, the structure is changed to prevent the bolt from loosening and ensure the long-term stability of the connection.
If you want to know how Rivet Nuts work, you can consult our customer service staff, we will serve you wholeheartedly 24 hours a day!
